FEATURES
- Seamless Q-SYS integration with audio transport and control via standard Gigabit Ethernet protocols and hardware.
- Capable of providing up to 5,000 W continuous and 8,000 W peak.
- Flexible Amplifier Summing Technology™ (FAST) permits total amplifier power to be distributed across one, two, three or all four channels.
- PowerLight universal switchmode power supply with PFC for highest efficiency, improved audio performance, and low weight.
- Mic/Line input Euroblock connectors and touch-proof Euroblock loudspeaker connections.
- Eight bi-directional GPIO connections that can be used for analog or digital inputs or outputs to/from Q-SYS.
- Built-in energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality.
- Q-SYS technical support is available 24/7 - worldwide
Power Specifications
| DPA4.2Q | DPA4.3Q | DPA4.5Q | |||||
| Peak | Continuous | Peak | Continuous | Peak | Continuous | ||
|
4 Independent Channels A, B, C, D |
8Ω | 500 W | 400 W | 900 W | 625 W | 1200 W | 1150 W |
| 4Ω | 700 W | 400 W | 1400 W | 625 W | 2000 W | 1250 W | |
| 2Ω | 625 W | 325 W | 1200 W | 625 W | 1600 W | 625 W | |
|
2 Channel BTL Bridged A+B or C+D Doubles Voltage |
8Ω | 1200 W | 800 W | 2400 W | 1250 W | 4000 W | 2250 W |
| 4Ω | 1500 W | 600 W | NR* | NR* | NR* | NR* | |
| 2Ω | NR* | NR* | NR* | NR* | NR* | NR* | |
|
2 Channel Parallel AB or CD Doubles Current |
8Ω | 500 W | 400 W | 1300 W | 1150 W | 1250 W | 1150 W |
| 4Ω | 950 W | 800 W | 2000 W | 1250 W | 2400 W | 2250 W | |
| 2Ω | 1200 W | 800 W | 2500 W | 1250 W | 4000 W | 2100 W | |
|
1 Channel 3CH Parallel ABC Triples Current |
8Ω | 500 W | 400 W | 1400 W | 1150 W | 1400 W | 1150 W |
| 4Ω | 950 W | 800 W | 2400 W | 2000 W | 2500 W | 2400 W | |
| 2Ω | 1800 W | 1200 W | 3500 W | 2500 W | 4500 W | 4100 W | |
|
1 Channel Bridged/Parallel AB+CD Doubles Current and Voltage |
8Ω | 1600 W | 1500 W | 3500 W | 2500 W | 4500 W | 4200 W |
| 4Ω | 2500 W | 1600 W | 5000 W | 2500 W | 7500 W | 4200 W | |
| 2Ω | NR* | NR* | NR* | NR* | NR* | NR* | |
|
1 Channel 4CH Parallel ABCD Quadruples Current |
8Ω | 500 W | 400 W | 1400 W | 1150 W | 1600 W | 1150 W |
| 4Ω | 1000 W | 800 W | 3000 W | 2500 W | 3000 W | 2300 W | |
| 2Ω | 1700 W | 1600 W | 5000 W | 2500 W | 5300 W | 4200 W | |
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count
General Specifications
| DPA4.2Q | DPA4.3Q | DPA4.5Q | |
|
Typical Distortion |
0.01 - 0.06% |
||
|
Maximum Distortion |
1.0% |
||
|
Frequency response |
20 Hz - 15 kHz +/- 0.2 dB 20 Hz - 20 kHz +0.2 dB / -0.7 dB |
||
|
Noise Unweighted Output Unmuted Weighted Output Muted |
-101 dB -109 dB |
||
|
Gain (1.2V setting) |
34.0 dB |
38.4 dB |
38.4 dB |
|
Damping factor |
>150 |
||
|
Input impedance |
>10k, balanced or unbalanced |
||
|
Maximum input level (3.9V setting) (1.2V setting) |
12.28V (+24 dBu) 3.88V (+14 dBu) |
||
|
Amplifier and load protection |
Short circuit, open circuit, thermal, RF protection. On/Off muting, DC fault shutdown, active inrush limiting, input current limiting |
||
|
AC Power Input |
Universal Power Supply 100 - 240 VAC, 50 - 60 Hz |
||
|
Agency approvals |
UL, CE, RoHS/WEEE compliant, FCC Class A (conducted and radiated emissions) |
||
|
Carton contents |
Locking IEC Cable, Quick Start Guide, USB Cable |
||
Controls, Indicators and Connections
| DPA4.2Q | DPA4.3Q | DPA4.5Q | |
|
Controls and indicators (front) |
Power • Channel MUTE Buttons • Channel SELECT Buttons • Channel Input Signal and CLIP LED Indicators • Channel Output and LIMIT LED Meters • HOME, ENTER, EXIT, GAIN Navigation Buttons • Control Knob |
||
|
Controls and indicators (rear) |
AC Power Disconnect |
||
|
Input connectors |
3-pin Phoenix |
||
|
Output connectors |
8-pin Phoenix Speaker |
||